Для Hyundai H-CMDN6000 найдено одна инструкция
H-CMDN6000 2 DIN DVD/CD/MP3 RECEIVER WITH BUILT-IN 6.5” TFT DISPLAY Instruction manual DVD/CD/MP3- 2 DIN 6.5” TFT-
Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents
GPS operations ................................................................................................................................................46 Handling and cleaning discs
Important safeguards Using the device at temperature below -10º may cause the breakage of the device. Before using, please, heat up the passenger compartment to the recommended temperature! Read carefully through this manual to familiarize yourself with this high-quality car stereo system.
Accessories 5
Installation/connection Installation method 1: DIN Front-mount Installation method 2: Installation using the screw holes at the sides of the unit. Select a position where the screw holes of the mounting bracket supplied with the car and the screw holes of the main unit become aligned (are fitted),
Detach the unit Detach the front panel before disassembling the unit. Take out the Outer trim frame. 7
Electrical Connection 1. Output plug 2. Output socket 3. Tuner reception Note: The brown wire is connected with brake signal; for safety, the programs can be seen on the monitor after braking the car, but the menu and RCA outputs are free of it. If you do not want to use this function, connect it
Unit controls Front panel 1. SRC/PWR button During waiting mode, briefly press it to turn on the unit; during working status, briefly press it to select radio mode or playback mode, hold and press it to turn the unit on or off. 2. SEL/MENU button Briefly press it to select the function; keep
Briefly press it to activate the traffic alarm function; press and hold it to select the bands. 10. REL/NAV button Press it to slide down the front panel, then you can insert or eject a disc or a SD card. Press and hold it to activate GPS function. 11. Cursor buttons
Remote control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. AF/EQ button SOURCE button GOTO button BND/TITLE button AMS/MENU button LOC/SUB-T button ST/AUDIO button OSD button PTY/ANGLE button SLOW button ZOOM button PROG button P/N button VOL +/ VOL- buttons MUTE
22. 23. 24. 25. 26. PAUSE button STOP button RPT button RDM button SEL button Changing the battery 1. Press the catch and at the same time pull out the battery tray (pic. 1). 2. Insert the 1 lithium battery, type CR2025 (3V) battery with the stamped (+) mark facing upward. Insert the battery tray
General operations Reset the Unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel at first, and then press RESET button on the unit with a pointed object, (such as a ballpoint pen) to set the unit to initial state. Note: When
Volume Control Press VOL+/VOL- button on the RC or on the unit to increase/decrease the sound level. Turning Loudness On/Off Press and hold TA/LOUD button on the RC to activate loud function. You can press this button to increase the low frequency, which can improve sensitivity for your ears. Keep
Insert an SD Card Press REL button after turning the unit on, then insert an SD card into SD slot when the TFT is slanted, and the contents of the card will be played. Clear After inputting something wrong, press CLEAR button to clear it. Mode Selector Repeatedly press SOURCE button on the RC or
Main menu Note: This unit can be operated by touching the screen buttons. Thus you can select the menus and change the parameters. When the unit is on, the monitor will display main menu. Press and hold SETUP button on the RC or SEL/MENU on the head unit, or press MENU on the monitor to enter the
Press and buttons to adjust the desired FAD level, press EXIT to exit this menu. Note: When adjusting the other options perform the same operation. Video Adjust In this menu you can adjust CONTRAST, COLOR, TINT, BRIGHT, PICTURE. Source Adjust You can adjust TV, CDC, GPS and AUX to ON or OFF, press
System Adjust In this menu you can adjust CLOCK SYS (clock system), KEY BEEP, MONI FLEX (monitor flex), REVER POLA (reverse polarity), SUBWOOFER, AMS FULLUP, LOCAL AREA, LOCAL, GOTO FREQ, RT SCROLL, TA VOLUME, REGION, ADJ SCREEN, CLOCK ADJ. Note: Press arrow buttons at the right side of the screen
Note: This function is not available. AMS Fullup In this menu you can set the modes of AMS. When the setup is ON, the presettable stations are full, new one’s are not allowed. When you select OFF, it will search continually. Local Area You can select EUROPE, USA, to search the stations quickly in
Adj Screen Press ADJ SCREEN to display the above menu, there are a square button at the top left corner and a tip: please press the button. Press the square button at place 1, then the button will move to place 2, press it at place 2, it will move to place 3, then place 4, press SAVE at last. Clock
Digital tuner operations Mode selecting Press the SRC/PWR button on the unit or SOURCE button on the RC repeatedly to switch to RADIO mode. User interface (UI) of Radio mode When the unit is switched to Radio mode, the following user interface will be displayed on the display: 1. Band indicator.
Band selection Press the BND/TITLE button on the RC or on the touch screen to switch to the bands in the following order: FM1 - FM2 - FM3 - AM1 - AM2 (for two bands); FM1 - FM2 - FM3 - MW - LW (for three bands). Manual/automatic tuning Manual tuning: Press / buttons on the RC repeatedly to select a
Scanning/Memorizing Stations Automatically During radio mode, you can press AMS/MENU button on the RC or AMS button on the monitor to scan each stored station for 5 seconds respectively which stored with number buttons (1 – 6). You can press the corresponding Number Buttons, AMS/MENU button on the
RDS Setup 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. AF. Press it to activate AF function. . Press it to activate TA function. / . Press it to select PTY code. PTY. Press it to activate PTY function. During PTY ON, press this button to search the playing track type. Displays the RADIO TEXT of the RDS station.
Program Type Briefly press PTY/ANGLE button on the RC or PTY button on the monitor to activate PTY function. When PTY is on, PTY ON appears on the monitor, you can press UP/DOWN to select the program type, and then press PTY CODE to search the special program. And the monitor displays PTY SEARCH.
Disc operations Discs for playback This unit can play disc types: DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW. Compatible with formats: DVD/SVCD/VCD/MP3/WMA/HDCD/CDDA/MPEG4 (DivX)/PictureCD/JPEG. The following file types are supported: Audio files: MP3 (*.mp3) WMA (*.wma) Video files: MP4 (*.avi,
DVD operations Glossary PBC (Play Back Control) Play Back Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of
Playing a DVD Insert a DVD disc into the disc slot, the unit will automatically switch on, if a DVD disc is loaded, press ENTER button to start the playback. To eject a DVD press EJECT button on the unit, on the RC. Touch the screen at any place when DVD mode is on and the monitor will display the
Repeat Playing Press RPT button on the RC to perform replaying function as followings: System Switch During playback mode, Press P/N button on the RC to set the TV standard to PAL or NTSC or AUTO system. Slow motion playback Press button to slow forward or slow backward. Changing the size of the
Changing the viewing angle (Multi-angle) With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, you can press PTY/ANGLE button to switch among viewing angles during playback. Notes: The mark on a DVD's package indicates that it supports multi-angle scenes. Number 3 in the
DVD Setup menu 1. Press SETUP button on the RC to enter the setup menu. 2. Use the / buttons to choose the setup page: General page, Dolby Digital setup, Preference page, Exit. 3. Press the button to enter the setup page selected. 4. Use / buttons to select the option you want to adjust. 5. Press
If the Screen saver is set On and the unit is switched on without a disc playing for 3 minutes, a moving picture appears on the TFT. Dolby digital setup DUAL MONO Choose the mode of the audio output: Stereo: choose this setting, when 5.1-channel sound playing, two channels of signals will be output
AUDIO, SUBTITLE, DISC MENU Set the desired languages for all the settings. If a setting is supported by disc content, it will work. Otherwise the disc default value works. You also can press the ST/AUDIO button on the RC to select the audio language. Press the LOC/SUB-T button on the RC to select
Reset to the initial factory setups. Exit Select the Exit page to exit the Setup menu. 34
VCD/CD operations Along with buttons of the RC and the unit you can use touch buttons of this menu to perform some of the following operations. Playing a VCD/CD Insert a VCD/CD disc into the disc slot, the unit will automatically switch on, if a disc is loaded, press SOURCE button to start the
Number Buttons Press one of number buttons (0-9) to play a track you want. Stop Playback Press STOP button, then press ENTER or PAUSE button on the RC or on the monitor to resume playing. Pause the Playback Press PAUSE button on the RC or on the monitor to switch between play and pause. Fast
On Screen Display Briefly press OSD button and the display will show: Single elapsed => Single remain => Total elapsed => Total remain => OFF. Press and hold OSD button on the RC to display the current setup. Setting the Playback Time During CD playback, press GOTO button, there will be track : — :
Program Playing During VCD/CD mode, press PROG button, the monitor displays the program menu. Press number buttons to select the track number and then press cursor buttons to move the cursor to START, press ENTER button to start program playing; move the cursor to EXIT and press ENTER button to
MP4 Disc operations Playing tracks Insert an MP4 (AVI, MPEG4) disc into the disc slot, the unit will automatically switch on, if a disc is loaded, press SOURCE button to start the playback. Number buttons You can select any tracks directly using number buttons (0-9). The track you selected will be
On Screen Display Briefly press OSD button the display shows: Press and hold OSD button on the RC to display the current setup. Setting the Playback Time Press GOTO button, and the monitor will show: —-:-—,enter your desired time of the playback using number buttons. and press ENTER to set the
MP3/SD operations Along with buttons of the RC and the unit you can use touch buttons of this menu to perform some of the following operations. Playing an MP3/SD Insert an MP3 disc into the disc slot, the unit will automatically switch on, if an MP3 disc is loaded, press SOURCE to start the
Selecting the MP3/SD Track Press GOTO button and the monitor will show: ---. Then press Number Buttons to enter the Mp3 track number and press then ENTER button to play; secondly press GOTO button, and the monitor will shows: --:--, now enter the desired number to play the current track at this
MP3 overview MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. This product allows playback of MP3 files on DVD-R/-RW, DVD+R/+RW, CD-ROM, CD-R/-RW discs. The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support
AUX/TV operations (optional) Press SRC button to switch to AUX mode. Along with buttons of the RC and the unit you can use touch buttons of this menu to perform some of the following operations. TV touch screen menu Press SRC button to switch to the TV mode. 1. Station selector. To select 1 to 10
You can adjust the following items: SOUND: M/N, B/G, D/K. BAND: V-l, V-H, UHF MODE: SECAM/NTSC/PAL 7. Mode selector 8. Preset stations. To show all of stations in item 1. 9. Frequency. To show the TV frequency. TV Station Selection Press number buttons or / buttons on the RC to select the TV
GPS operations Press and hold the REL/NAV button on the unit to activate the GPS function. For details of operating the in-built GPS navigation system see the Navigation System User’s Manual (in Russian only) included in the accessories package. 46
Handling and cleaning discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high
Troubleshooting guide Solution If the power supply is properly connected to the car accessory switch the ignition key to “ACC”. Replace the fuse. The fuse is blown. Disc cannot be loaded. Presence of disc inside the player. Remove the disc in the player then put a new upward. Insert the compact
Specification DVD/CD/MP3 RECEIVER General Power supply: 12 V DC Maximum power output: 50 W x 4 channels Compatible disk types: DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW Compatible formats: DVD/SVCD/VCD/MP3/WMA/HDCD/CDDA/MPEG4(DivX)/Picture-CD/JPEG Dimensions/weight: D x W x H: 172 x 178 x 100 mm / 3.5 kg ESP
GPS TEMP Satellite Acquisition Sensitivity Cold Start Time Warm Start Time Hot Start 1st Positioning Time Signal Format Language of map MAP Display Voice Navigation Software Processor OS Antenna GPS Module SDRAM Flash ROM Slot Input Method 25 ° -149dBm <60S (Open sky) <35S (Open sky) <10S (Open
! . , . ....................................................................................................................................................51 ...............................................................................................................................53
....................................................................................................................................99 .............................................................................................101
-10º . . , . . , , . , . . , , . , . , . , , . , . , , . , , , , , . . , . . , . , . 53
1. 1 . 2. 1 . 3. 4. 1 5. 1 . 6. 2 . 7. 8. 1 54 . . 5-4 20 – 5 1 . . .
1: 2: . , , . 55
. . 56
1. 2. 3. : ( ) , . , . , . . 57
1. SRC/PWR . . , . 2. SEL/MENU . 3. . MUTE . 4. 5. . VOLUME+/ VOLUME. 6. 7. 8. RESET. TFT AF/EQ SEL. , . . . , . 9. 10. TA/BAND , REL/NAV ; . 58
. 11. 12. , / / / / ANGLE+/ANGLE- 13. EJECT. SD GPS. / / / ; 14. 15. 16. REL. SD . SD . 59 .
( AF/EQ SOURCE GOTO BND/TITLE AMS/MENU LOC/SUB-T ST/AUDIO OSD PTY/ANGLE SLOW ZOOM PROG P/N VOL +/ VOLMUTE TA/LOUD EJECT 0-9 NUMBER CLEAR ENTER / / / / / / FAST FORWARD / / PREVIOUS/NEXT 21. SETUP ) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. FAST REWIND/ 60
22. 23. 24. 25. 26. PAUSE STOP RPT RDM SEL 61
1. 2. , (CR 2025 3V), . . . : . , . ( –6 ). . . 62
, , ); . ( RESET , . : RESET . . SOURCE SRC/PWR , . . , . 2 . : . SEL , : BALAN => FADE => BASS => TREBL => VOLUME. VOL+/VOL- , . , AF/EQ. : POP – CLAS – ROCK – EQ AF/EQ 63
OFF. – OFF. VOL+/VOL. (LOUD) TA/LOUD , LOUD. . , EJECT . , . REL , . . ANGLE+/- . MUTE . . MUTE. REL . . 64
SD REL , , , , SD . CLEAR SOURCE , . SRC/PWR . , , 65 .
: . . , . SETUP SEL/MENU MENU , . : AUDIO, VIDEO, SOURCE, SYSTEM, EXIT. . AUDIO ( ) AUDIO , ), BALANCE ( TREBLE ( VOLUME ) ), FAD, BASS ( ). 66
, FAD . , EXIT, FAD, . : . VIDEO ( ) CONTRAST ( BRIGHT ( ) ), COLOR ( ), TINT ( PICTURE ( ). 3. SOURCE ( ) TV, CDC, GPS ON ( ) OFF ( OFF : ), ) AUX . . 67
4. SYSTEM ( ) CLOCK SYS, KEY BEEP, MONI FLEX, REVER POLA, SUBWOOFER, AMS FULLUP, LOCAL AREA, LOCAL, GOTO FREQ, RT SCROLL, TA VOLUME, REGION, ADJ SCREEN CLOCK ADJ. : . CLOCK SYS ( ) CLOCK SYSTEM . KEY BEEP ( 12- 24- ) ; , ON ( ) OFF ( ); - ON, . MONI FLEX - ( ) . MANUAL ( ) AUTO ( ). – AUTO; . 68
REVER POLA ( ) . BATTERY +12 V, GROUND SUBWOOFER ( . 0 V, . ) ON ; - ON. OFF; : ! AMS ( AMS) AMS. , ON ( . ) OFF ( ) . LOCAL AREA ( ) EUROPE, USA OIRT LOCAL ( , . ) ; ; . GOTO FREQ ( ) 69 ON ( ) OFF ( )
ON ( ), GOTO . RT Scroll ( RT) : SLOW ( TA Volume ( ), NORMAL ( FAST ( ). ) : LOW ( Region ( ) ), NORMAL ( ) HIGH ( ). ) AF, ADJ SCREEN ( ON ( ). ) ADJ SCREEN . : please press the button (« 1, .( 3 2. 4 ). SAVE. CLOCK ADJ ( , ) CLOCK ADJ . 70 »). 2,
SRC/PWR SOURCE . , 1. : . , . 2. . . 3. . , . 4. SEEK+/SEEK-. ; . 5. VOL+/VOL-. . 6. BAND. 7. AMS. . 8. MENU. 9. SRC. . ; , . . 71
10. 6 . 11. RDS. , 6 . RDS SETUP. , ; , . BND/TITLE : FM1 - FM2 - FM3 - AM1 - AM2 ( ). FM1 - FM2 - FM3 - MW - LW ( : ); / . : / 3 / , , . DX/LOC LOC/SUB-T . , LOC; . , . : AM. , / . 72
MO/ST ST/AUDIO . MONO. . : FM. AMS/MENU 5 AMS ; , (1 – 6). , , AMS/MENU . 2 AMS . AMS AMS/MENU . , (1 – 6). 2 . : 6 . OSD DISP . GOTO, FREQ. . 73 ,
RDS 1. 2. 3. 4. 5. AF – – / – PTY – AF. TA. PTY. PTY. PTY . RDS. 6. 7. 8. PS – SEEK+/SEEK- . 9. PREV – 10. EQ – , . 11. LOUD – RDS. . , LOUD. AF/EQ RDS . AF ; . Traffic Alarm TA/LOUD . TP. Traffic alarm. , TP 74 AF, «TA»
«TA» ; . TA , . ( ., DVD, AUX), RDS. . PTY/ANGLE PTY, PTY UP/DOWN PTY ON; PTY CODE PTY SEARCH. PTY . . RDS . , . PTY OFF, : RDS RDS TA/LOUD . 75 TA, , PTY. , ,
: DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW. : DVD/SVCD/VCD/MP3/WMA/HDCD/CDDA/MPEG4(DivX)/PictureCD/JPEG. : : MP3 (*.mp3) WMA (*.wma) : MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1(*.dat) : JPEG (*.jpg) ISO 9660 ISO 9660 + Joliet 30 . – 448. -8 . – 99. - 99 59 . MP3 : 8 48 ( 44,1 ). P3 : 32
DVD , PBC ( ) – , . , PBC, . . – , DVD. 2 1, . , , 3. . , . . – . . , , . 77
DVD DVD , . ENTER DVD EJECT . . . DVD STOP. ENTER . DVD / / . / , / . : 78 PAUSE
(0-9) ; . RPT ; : P/N , PAL, NTSC AUTO. : DVD ZOOM . : 79
OSD => : => OSD => => . . DVD GOTO, : ./ , ./ ENTER / . / . / . GOTO. ( Multi-angle) multi-angle ( DVD ), ANGLE . : multi-angle. DVD , 3 , , . ANGLE . ( Multi-audio) DVD AUDIO AUDIO 1 => AUDIO 2 => AUDIO 3. . . 80
: , ( multi-audio. Multi-subtitle) DVD , SUB-T . : Subtitles 1 — Subtitles 2 — Subtitles OFF : , 1. MENU DVD multi-subtitle. AMS/MENU, . ; ENTER . 2. DVD . BAND/TITLE, ENTER . 81 ;
DVD 1. 2. SETUP / , : , 3. 4. 5. . , DOLBY, . . / , . . / ENTER 6. 7. . . SETUP . 4:3 PS: , , . 4:3 LB: , , . : . , DVD – . 82 ,
, DVD , , . . , . . SUBTITLE , - . , , . DOLBY : . c : , 5,1- , . .: . . .: : OFF ( . . FULL .) / . . . , , . 83
. PAL: NTSC: SECAM: : , , , . , . . , . , , . , . , LOC/SUB-T . ST/AUDIO , , , , . , : - – . . 1 8 , . . . 84 .
, . « 8888), , , », ( ENTER. , « ». 8888 ( ), , (4 . (8888) . ENTER, . . , . 85 ).
VCD/CD . VCD/CD ; SOURCE VCD/CD . . , EJECT. / , / . RPT ; , . RDM . , . 86
(0-9) . STOP. . ENTER PAUSE ( . / , / . : P/N PAUSE , PAL, NTSC 87 AUTO. )
. : ZOOM . : OSD => => : => => OSD . DISP . GOTO; « »: —-:—- . . , « », . V D , : . / 88 ,
ENTER . / . GOTO. VCD ST/AUDIO PBC VCD, : BND/TITLE, PBC . . SEL/MENU, , SEL/TITLE. . : , PBC PBC 2.0 . VCD/CD PROG; . , , ENTER . . , ENTER. ENTER; 89
ENTER. STOP PROG . CD-R CD-RW, 44,1 128 MP3 3 256 . 3 . , ISO 9660, 8, ( ). CD-R . , , , MP3 CD-R CD-RW . 3 3 , CD-R , 3. CD-RW . . CD-R CD-RW 16 , . . 1. ID3TAG. , . 90
MP4 MP4 (AVI, MPEG4) SOURCE ; . . (0-9). . MP4 (AVI, MPEG4) STOP PAUSE. . RDM . . ( ) MP4 (AVI, MPEG4) PAUSE . . MP4 (AVI, MPEG4) RPT , . 91 .
OSD : – – . OSD . GOTO; —-:—- . , . GOTO, , ENTER. / , / . / , / . : ZOOM . : 92 ENTER -—:—-:—-,
3 . MP3 /SD ; SOURCE . MP3 . . , STOP, , : / /SD , . EJECT. SD , . / . RPT ; . (0-9) . 93
STOP, . MP3 GOTO; —-:—- . ENTER --:--. M 3 ; GOTO, . CLEAR . ( ) MP3 PAUSE . . / / . : OSD DISP . SD SD . 94
MP3 3 MPEG 3 . 3 DVD-R/-RW, DVD+R/+RW, CD- ROM, CD-R/-RW. 3, 9660. , ISO 3, . 3, , “.mp3”. 3 , “.mp3”, . , PC “ ” “ “ ” MP3” “ . 8, . 448. . , , 3. 8 ”, VBR, , . VBR: . 95
AUX/ ( ) SRC AUX. SRC . . 1. . 1 – 10 . 10 – 30 -- , . 2. CH-/CH+ . . 3. VOL+/VOL- . 4. STEP. 5. ANT. 6. SETUP. . . . : 96
: SOUND ( ): M/N, B/G, D/K. BAND ( ): V-l, V-H, UHF MODE ( ): SECAM/NTSC/PAL 7. . 8. . 9. . . . , ; / 1-9 ; GOTO, 10, / . / , . AMS/MENU . 97
GPS REL/NAV , ( GPS. ), 98 .
, . , . , . , , . ( , ). . , , . . . . ( . ), , , . . 99 .
, , . . 100
. , ». . . . , . . . . . . . . . . . RESET. . . . . . . . 101
. . . 102
DVD/CD/MP3 ( )/ 12 50 4 DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW DVD/SVCD/VCD/MP3/WMA/HDCD/CDDA/MPEG4(DivX)/ Picture-CD/JPEG 172 178 100 /3,5 40 CD, 120 3 6,5 480 234 16:9 300:1 2 350 PAL/NTSC/AUTO FM 65 10 18 – 74 /87,5 AM 522 – 1620 12 SECAM/NTSC/PAL 48,25 – 863,25 103 – 108
GPS 25 ° « « « » » » GPS -149 <60 ( <35 ( <10 ( <100 ( NMEA0183 2D ) ) ) ) 3D SAMSUNG 2SC2440A-40Arm9 400 DSP Microsoft Windows CE.NET 4.2 CORE ( 5.0) GPS SDRAM 64 64 SD SD SIRF3 GPS RF (100 ) NAND Flash ROM (20 . . 104 )